ACER BTP-58A1 Battery

The keyboard removal instructions will be almost the same for most modern ASUS Eee PC 1005HA Adapter.
Step1: Lift it up with a small screwdriver and remove using fingers. On most Toshiba laptops the keyboard bezel doesn’t have any circuit board underneath, it’s just a piece of plastic and you don’t have to worry about cables.
Step2: After the bezel is removed you get an access to the Acer Aspire 5100 Keyboard screws. Remove two (or more) screws. Release the plastic latch pointed with the red arrow and lift up the keyboard. Carefully put the keyboard aside so you can access the connector underneath the keyboard. Do not forget that the keyboard is still connected to the motherboard.
Step3: Before you remove the Acer Aspire 5315 Keyboard, you’ll have to open the connector and release the flat ribbon cable.
Note: Be careful, this type of connector is fragile.
Step4: Unlock the connector by moving the lock up and after that release the ribbon cable. Remove and replace the Acer Aspire 5520 Keyboard. For assembly instructions follow all the steps in the reverse order.
Tip2:
If you take your Toshiba apart & evidently was not careful when removing the keyboard since it came a part from the motherboard. How do you reconnect?
1. Unlock the connector.
2. Insert the ACER BTP-58A1 Battery cable into the connector.
3. Lock the connector.
Note2:
1.The keyboard connector is extremely fragile and if the pins get bent even slightly it is impossible to reconnect them. Sometimes you might found that by pulling the green cable tab out of the connector itself worked great.
2. The touchpad cable can be replaced by using a snipe nosed pair of pliers.
3. Contact cemented the jack into the slot and then glued a thick folded cardboard piece between the back of the jack and the speaker box, this will prevent the jack coming loose in the future.Asus Eee PC 1000H AC Adapter
4. Tools required: Jewellers Starhead screwdriver, Snipe nosed pliers, contact cement, and a sharp knife to lift the cover.